Call Us Now 24-7
0488 886 344

5 Factors that Contribute to Pipe Deterioration

plumber monavale 5 Factors that Contribute to Pipe DeteriorationThere are countless factors that prove to be the reason for pipe deterioration especially with ones that are in constant contact with water. This is the reason why there is early deterioration with these pipes. The deterioration would lead to the pipe to sag, break, crack or burst. Many plumbing professionals have presented varying reasons that lead to even higher risks. But when these factors are focused on a main point, the pipe will certainly be in the direct line of deterioration. Here are 5 common factors that promote deterioration:

1.Pipe Material

One very good example of how pipes differ from each other can be found on its composition. This property is very important to note since the composition very much determines the performance of the pipe. what they are made of also decides what types of load they can carry. One pipe type can be made of a material much sturdier than that of another one and this material will play a great hand in deciding the length of service years that a pipe can have while also limiting how a pipe could possible fail.
The most commonly used pipe type for transporting and distributing water are cast iron pipes, concrete pipe, cement pipes, ductile iron pipes and polyvinyl pipes. When a pipe does not have high resistance against pressure and temperature, the simple task of water distribution can be interrupted by damage due to water hammer, temperature and pressure.

2.Pipe Thickness

This factor is another deciding feature on how long and how well a plumbing system can do its job. Thick-walled pipes tend to have longer service years, higher resistance to corrosive factors, defence against pressure and are more durable than the pipes whose walls are thin and weak. The thicker the walls, the better it copes with temperature changes. Pipes that have thin walls are very easily affected by deterioration, structural damage caused by the pressure inside it and the pressing weight of the dead load above it. While thick walls can resist crushing pressure imposed by their load, thin-walled pipes are weak against it and get dented in a short time. Corrosion also does a quick work in penetrating thin and weak pipes.

3.Pipe Age

The service years that a pipe has under its belt certainly affects its performance as well as the plumbing systems. The older the pipe gets, the lesser structural leverage it has to withstand varying factors that causes a pipe to deteriorate and weaken. The older they go, the more vulnerable they become to deterioration this is because they have been exposed to stress and pressure for too long.

4.Pipe Diameter

The size of the pipe also plays a role in its performance. Remember that lesser amount of obstructions and damages are found in pipes that are bigger and more spacious. This is due to the fact that larger pipes experience lesser pressure because there is a bigger area for water and wastewater flow. Smaller pipes, on the other hand, are experiencing more pressure for inversely the same reason.

5.Type of Joint Used

The kind of joint and fitting also creates a rather good angle to investigate a pipe’s structural strength. Some joints tend to have more problems than others and are bound to have early failures than most.

Contact Us

Location :

Servicing :

Book a Job Or Request For Expert Advise

Plumber Mona Vale Copyright